How to use digital persona 4500 finger print reader?

The best way to use a DigitalPersona 4500 fingerprint reader, Initially, install the required drivers and software. Following that, register your fingerprint by placing your finger on the reader several times as instructed. Once your fingerprint is registered, you can easily place your finger on the reader to log in or execute other actions as set up by the software.

Setup and enrollment

• Install the software: Run the setup.exe file from the installation media or download folder for your specific software. Follow the prompts and restart your computer when the installation is complete.

Enroll your fingerprint:

• Open the application where you want to use the fingerprint reader.
• Go to the user settings or “Settings” menu and select the option to add a new fingerprint.
• Follow the on-screen prompts, which will typically involve placing your finger on the reader multiple times at different angles to capture a complete image.
• The reader will provide visual feedback, such as a blue light when ready to scan and a red flash or blue flashing light when it has captured the image.

Confirm enrollment:

• Once the process is complete, confirm the enrollment to save the fingerprint. The system may ask you to log in with a username and password before you can enroll a fingerprint.

Using the reader

• Log in: Open the application and place your enrolled finger on the reader. The system will automatically scan and verify the fingerprint to log you in.
• Confirm actions: When an action requires a fingerprint, such as clocking in, the reader will indicate that it is ready. Place your finger on the reader to complete the action.
• Troubleshoot: If the reader is not working, check Device Manager to ensure the correct driver is selected. You may need to manually update the driver and choose the correct “URU4500” driver from the list, as Windows may have installed a different one. 
• HID Digitalpersona 4500 fingerprint reader
• HID DigitalPersona 4500 Reader Datasheet